zhanqingxia
/
card_2.4G_compare_tools
Следить 1
В избранное 0
Форкнуть 0
Код Задачи 0 Pull Request'ы 0 Релизы 0 Вики Активность
Вы не можете выбрать более 25 тем Темы должны начинаться с буквы или цифры, могут содержать дефисы(-) и должны содержать не более 35 символов.
1 коммит
1 ветка
2.6MB
Дерево: cec8ffabff
Ветки Теги
${ item.name }
Создать ветку ${ searchTerm }
из 'cec8ffabff'
${ noResults }
card_2.4G_compare_tools/Libraries/system_stm32f10x.c

1034 lines
31KB
Исходник Blame История 

  1. /**

  2.   ******************************************************************************

  3.   * @file    system_stm32f10x.c

  4.   * @author  MCD Application Team

  5.   * @version V3.4.0

  6.   * @date    10/15/2010

  7.   * @brief   CMSIS Cortex-M3 Device Peripheral Access Layer System Source File.

  8.   ******************************************************************************  

  9.   *

  10.   * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS

  11.   * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE

  12.   * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY

  13.   * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING

  14.   * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE

  15.   * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.

  16.   *

  17.   * <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>

  18.   ******************************************************************************

  19.   */

  20. 

  21. /** @addtogroup CMSIS

  22.   * @{

  23.   */

  24. 

  25. /** @addtogroup stm32f10x_system

  26.   * @{

  27.   */  

  28.   

  29. /** @addtogroup STM32F10x_System_Private_Includes

  30.   * @{

  31.   */

  32. 

  33. #include "stm32f10x.h"

  34. 

  35. /**

  36.   * @}

  37.   */

  38. 

  39. /** @addtogroup STM32F10x_System_Private_TypesDefinitions

  40.   * @{

  41.   */

  42. 

  43. /**

  44.   * @}

  45.   */

  46. 

  47. /** @addtogroup STM32F10x_System_Private_Defines

  48.   * @{

  49.   */

  50. 

  51. /*!< Uncomment the line corresponding to the desired System clock (SYSCLK)

  52.    frequency (after reset the HSI is used as SYSCLK source)

  53.    

  54.    IMPORTANT NOTE:

  55.    ============== 

  56.    1. After each device reset the HSI is used as System clock source.

  57. 

  58.    2. Please make sure that the selected System clock doesn't exceed your device's

  59.       maximum frequency.

  60.       

  61.    3. If none of the define below is enabled, the HSI is used as System clock

  62.     source.

  63. 

  64.    4. The System clock configuration functions provided within this file assume that:

  65.         - For Low, Medium and High density Value line devices an external 8MHz 

  66.           crystal is used to drive the System clock.

  67.         - For Low, Medium and High density devices an external 8MHz crystal is

  68.           used to drive the System clock.

  69.         - For Connectivity line devices an external 25MHz crystal is used to drive

  70.           the System clock.

  71.      If you are using different crystal you have to adapt those functions accordingly.

  72.     */

  73.     

  74. #if defined (STM32F10X_LD_VL) || (defined STM32F10X_MD_VL) || (defined STM32F10X_HD_VL)

  75. /* #define SYSCLK_FREQ_HSE    HSE_VALUE */

  76.  #define SYSCLK_FREQ_24MHz  24000000

  77. #else

  78. /* #define SYSCLK_FREQ_HSE    HSE_VALUE */

  79. /* #define SYSCLK_FREQ_24MHz  24000000 */ 

  80. /* #define SYSCLK_FREQ_36MHz  36000000 */

  81. /* #define SYSCLK_FREQ_48MHz  48000000 */

  82. /* #define SYSCLK_FREQ_56MHz  56000000 */

  83. #define SYSCLK_FREQ_72MHz  72000000

  84. #endif

  85. 

  86. /*!< Uncomment the following line if you need to use external SRAM mounted

  87.      on STM3210E-EVAL board (STM32 High density and XL-density devices) or on 

  88.      STM32100E-EVAL board (STM32 High-density value line devices) as data memory */ 

  89. #if defined (STM32F10X_HD) || (defined STM32F10X_XL) || (defined STM32F10X_HD_VL)

  90. /* #define DATA_IN_ExtSRAM */

  91. #endif

  92. 

  93. /*!< Uncomment the following line if you need to relocate your vector Table in

  94.      Internal SRAM. */ 

  95. /* #define VECT_TAB_SRAM */

  96. #define VECT_TAB_OFFSET  0x0 /*!< Vector Table base offset field. 

  97.                                   This value must be a multiple of 0x100. */

  98. 

  99. 

  100. /**

  101.   * @}

  102.   */

  103. 

  104. /** @addtogroup STM32F10x_System_Private_Macros

  105.   * @{

  106.   */

  107. 

  108. /**

  109.   * @}

  110.   */

  111. 

  112. /** @addtogroup STM32F10x_System_Private_Variables

  113.   * @{

  114.   */

  115. 

  116. /*******************************************************************************

  117. *  Clock Definitions

  118. *******************************************************************************/

  119. #ifdef SYSCLK_FREQ_HSE

  120.   uint32_t SystemCoreClock         = SYSCLK_FREQ_HSE;        /*!< System Clock Frequency (Core Clock) */

  121. #elif defined SYSCLK_FREQ_24MHz

  122.   uint32_t SystemCoreClock         = SYSCLK_FREQ_24MHz;        /*!< System Clock Frequency (Core Clock) */

  123. #elif defined SYSCLK_FREQ_36MHz

  124.   uint32_t SystemCoreClock         = SYSCLK_FREQ_36MHz;        /*!< System Clock Frequency (Core Clock) */

  125. #elif defined SYSCLK_FREQ_48MHz

  126.   uint32_t SystemCoreClock         = SYSCLK_FREQ_48MHz;        /*!< System Clock Frequency (Core Clock) */

  127. #elif defined SYSCLK_FREQ_56MHz

  128.   uint32_t SystemCoreClock         = SYSCLK_FREQ_56MHz;        /*!< System Clock Frequency (Core Clock) */

  129. #elif defined SYSCLK_FREQ_72MHz

  130.   uint32_t SystemCoreClock         = SYSCLK_FREQ_72MHz;        /*!< System Clock Frequency (Core Clock) */

  131. #else /*!< HSI Selected as System Clock source */

  132.   uint32_t SystemCoreClock         = HSI_VALUE;        /*!< System Clock Frequency (Core Clock) */

  133. #endif

  134. 

  135. __I uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};

  136. /**

  137.   * @}

  138.   */

  139. 

  140. /** @addtogroup STM32F10x_System_Private_FunctionPrototypes

  141.   * @{

  142.   */

  143. 

  144. static void SetSysClock(void);

  145. 

  146. #ifdef SYSCLK_FREQ_HSE

  147.   static void SetSysClockToHSE(void);

  148. #elif defined SYSCLK_FREQ_24MHz

  149.   static void SetSysClockTo24(void);

  150. #elif defined SYSCLK_FREQ_36MHz

  151.   static void SetSysClockTo36(void);

  152. #elif defined SYSCLK_FREQ_48MHz

  153.   static void SetSysClockTo48(void);

  154. #elif defined SYSCLK_FREQ_56MHz

  155.   static void SetSysClockTo56(void);  

  156. #elif defined SYSCLK_FREQ_72MHz

  157.   static void SetSysClockTo72(void);

  158. #endif

  159. 

  160. #ifdef DATA_IN_ExtSRAM

  161.   static void SystemInit_ExtMemCtl(void); 

  162. #endif /* DATA_IN_ExtSRAM */

  163. 

  164. /**

  165.   * @}

  166.   */

  167. 

  168. /** @addtogroup STM32F10x_System_Private_Functions

  169.   * @{

  170.   */

  171. 

  172. /**

  173.   * @brief  Setup the microcontroller system

  174.   *         Initialize the Embedded Flash Interface, the PLL and update the 

  175.   *         SystemCoreClock variable.

  176.   * @note   This function should be used only after reset.

  177.   * @param  None

  178.   * @retval None

  179.   */

  180. void SystemInit (void)

  181. {

  182.   /* Reset the RCC clock configuration to the default reset state(for debug purpose) */

  183.   /* Set HSION bit */

  184.   RCC->CR |= (uint32_t)0x00000001;

  185. 

  186.   /* Reset SW, HPRE, PPRE1, PPRE2, ADCPRE and MCO bits */

  187. #ifndef STM32F10X_CL

  188.   RCC->CFGR &= (uint32_t)0xF8FF0000;

  189. #else

  190.   RCC->CFGR &= (uint32_t)0xF0FF0000;

  191. #endif /* STM32F10X_CL */   

  192.   

  193.   /* Reset HSEON, CSSON and PLLON bits */

  194.   RCC->CR &= (uint32_t)0xFEF6FFFF;

  195. 

  196.   /* Reset HSEBYP bit */

  197.   RCC->CR &= (uint32_t)0xFFFBFFFF;

  198. 

  199.   /* Reset PLLSRC, PLLXTPRE, PLLMUL and USBPRE/OTGFSPRE bits */

  200.   RCC->CFGR &= (uint32_t)0xFF80FFFF;

  201. 

  202. #ifdef STM32F10X_CL

  203.   /* Reset PLL2ON and PLL3ON bits */

  204.   RCC->CR &= (uint32_t)0xEBFFFFFF;

  205. 

  206.   /* Disable all interrupts and clear pending bits  */

  207.   RCC->CIR = 0x00FF0000;

  208. 

  209.   /* Reset CFGR2 register */

  210.   RCC->CFGR2 = 0x00000000;

  211. #elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL)

  212.   /* Disable all interrupts and clear pending bits  */

  213.   RCC->CIR = 0x009F0000;

  214. 

  215.   /* Reset CFGR2 register */

  216.   RCC->CFGR2 = 0x00000000;      

  217. #else

  218.   /* Disable all interrupts and clear pending bits  */

  219.   RCC->CIR = 0x009F0000;

  220. #endif /* STM32F10X_CL */

  221.     

  222. #if defined (STM32F10X_HD) || (defined STM32F10X_XL) || (defined STM32F10X_HD_VL)

  223.   #ifdef DATA_IN_ExtSRAM

  224.     SystemInit_ExtMemCtl(); 

  225.   #endif /* DATA_IN_ExtSRAM */

  226. #endif 

  227. 

  228.   /* Configure the System clock frequency, HCLK, PCLK2 and PCLK1 prescalers */

  229.   /* Configure the Flash Latency cycles and enable prefetch buffer */

  230.   SetSysClock();

  231. 

  232. #ifdef VECT_TAB_SRAM

  233.   SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM. */

  234. #else

  235.   SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH. */

  236. #endif 

  237. }

  238. 

  239. /**

  240.   * @brief  Update SystemCoreClock according to Clock Register Values

  241.   * @note   None

  242.   * @param  None

  243.   * @retval None

  244.   */

  245. void SystemCoreClockUpdate (void)

  246. {

  247.   uint32_t tmp = 0, pllmull = 0, pllsource = 0;

  248. 

  249. #ifdef  STM32F10X_CL

  250.   uint32_t prediv1source = 0, prediv1factor = 0, prediv2factor = 0, pll2mull = 0;

  251. #endif /* STM32F10X_CL */

  252. 

  253. #if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL)

  254.   uint32_t prediv1factor = 0;

  255. #endif /* STM32F10X_LD_VL or STM32F10X_MD_VL or STM32F10X_HD_VL */

  256.     

  257.   /* Get SYSCLK source -------------------------------------------------------*/

  258.   tmp = RCC->CFGR & RCC_CFGR_SWS;

  259.   

  260.   switch (tmp)

  261.   {

  262.     case 0x00:  /* HSI used as system clock */

  263.       SystemCoreClock = HSI_VALUE;

  264.       break;

  265.     case 0x04:  /* HSE used as system clock */

  266.       SystemCoreClock = HSE_VALUE;

  267.       break;

  268.     case 0x08:  /* PLL used as system clock */

  269. 

  270.       /* Get PLL clock source and multiplication factor ----------------------*/

  271.       pllmull = RCC->CFGR & RCC_CFGR_PLLMULL;

  272.       pllsource = RCC->CFGR & RCC_CFGR_PLLSRC;

  273.       

  274. #ifndef STM32F10X_CL      

  275.       pllmull = ( pllmull >> 18) + 2;

  276.       

  277.       if (pllsource == 0x00)

  278.       {

  279.         /* HSI oscillator clock divided by 2 selected as PLL clock entry */

  280.         SystemCoreClock = (HSI_VALUE >> 1) * pllmull;

  281.       }

  282.       else

  283.       {

  284.  #if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL)

  285.        prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1;

  286.        /* HSE oscillator clock selected as PREDIV1 clock entry */

  287.        SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull; 

  288.  #else

  289.         /* HSE selected as PLL clock entry */

  290.         if ((RCC->CFGR & RCC_CFGR_PLLXTPRE) != (uint32_t)RESET)

  291.         {/* HSE oscillator clock divided by 2 */

  292.           SystemCoreClock = (HSE_VALUE >> 1) * pllmull;

  293.         }

  294.         else

  295.         {

  296.           SystemCoreClock = HSE_VALUE * pllmull;

  297.         }

  298.  #endif

  299.       }

  300. #else

  301.       pllmull = pllmull >> 18;

  302.       

  303.       if (pllmull != 0x0D)

  304.       {

  305.          pllmull += 2;

  306.       }

  307.       else

  308.       { /* PLL multiplication factor = PLL input clock * 6.5 */

  309.         pllmull = 13 / 2; 

  310.       }

  311.             

  312.       if (pllsource == 0x00)

  313.       {

  314.         /* HSI oscillator clock divided by 2 selected as PLL clock entry */

  315.         SystemCoreClock = (HSI_VALUE >> 1) * pllmull;

  316.       }

  317.       else

  318.       {/* PREDIV1 selected as PLL clock entry */

  319.         

  320.         /* Get PREDIV1 clock source and division factor */

  321.         prediv1source = RCC->CFGR2 & RCC_CFGR2_PREDIV1SRC;

  322.         prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1;

  323.         

  324.         if (prediv1source == 0)

  325.         { 

  326.           /* HSE oscillator clock selected as PREDIV1 clock entry */

  327.           SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull;          

  328.         }

  329.         else

  330.         {/* PLL2 clock selected as PREDIV1 clock entry */

  331.           

  332.           /* Get PREDIV2 division factor and PLL2 multiplication factor */

  333.           prediv2factor = ((RCC->CFGR2 & RCC_CFGR2_PREDIV2) >> 4) + 1;

  334.           pll2mull = ((RCC->CFGR2 & RCC_CFGR2_PLL2MUL) >> 8 ) + 2; 

  335.           SystemCoreClock = (((HSE_VALUE / prediv2factor) * pll2mull) / prediv1factor) * pllmull;                         

  336.         }

  337.       }

  338. #endif /* STM32F10X_CL */ 

  339.       break;

  340. 

  341.     default:

  342.       SystemCoreClock = HSI_VALUE;

  343.       break;

  344.   }

  345.   

  346.   /* Compute HCLK clock frequency ----------------*/

  347.   /* Get HCLK prescaler */

  348.   tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)];

  349.   /* HCLK clock frequency */

  350.   SystemCoreClock >>= tmp;  

  351. }

  352. 

  353. /**

  354.   * @brief  Configures the System clock frequency, HCLK, PCLK2 and PCLK1 prescalers.

  355.   * @param  None

  356.   * @retval None

  357.   */

  358. static void SetSysClock(void)

  359. {

  360. #ifdef SYSCLK_FREQ_HSE

  361.   SetSysClockToHSE();

  362. #elif defined SYSCLK_FREQ_24MHz

  363.   SetSysClockTo24();

  364. #elif defined SYSCLK_FREQ_36MHz

  365.   SetSysClockTo36();

  366. #elif defined SYSCLK_FREQ_48MHz

  367.   SetSysClockTo48();

  368. #elif defined SYSCLK_FREQ_56MHz

  369.   SetSysClockTo56();  

  370. #elif defined SYSCLK_FREQ_72MHz

  371.   SetSysClockTo72();

  372. #endif

  373.  

  374.  /* If none of the define above is enabled, the HSI is used as System clock

  375.     source (default after reset) */ 

  376. }

  377. 

  378. /**

  379.   * @brief  Setup the external memory controller. Called in startup_stm32f10x.s 

  380.   *          before jump to __main

  381.   * @param  None

  382.   * @retval None

  383.   */ 

  384. #ifdef DATA_IN_ExtSRAM

  385. /**

  386.   * @brief  Setup the external memory controller. 

  387.   *         Called in startup_stm32f10x_xx.s/.c before jump to main.

  388.   * 	      This function configures the external SRAM mounted on STM3210E-EVAL

  389.   *         board (STM32 High density devices). This SRAM will be used as program

  390.   *         data memory (including heap and stack).

  391.   * @param  None

  392.   * @retval None

  393.   */ 

  394. void SystemInit_ExtMemCtl(void) 

  395. {

  396. /*!< FSMC Bank1 NOR/SRAM3 is used for the STM3210E-EVAL, if another Bank is 

  397.   required, then adjust the Register Addresses */

  398. 

  399.   /* Enable FSMC clock */

  400.   RCC->AHBENR = 0x00000114;

  401.   

  402.   /* Enable GPIOD, GPIOE, GPIOF and GPIOG clocks */  

  403.   RCC->APB2ENR = 0x000001E0;

  404.   

  405. /* ---------------  SRAM Data lines, NOE and NWE configuration ---------------*/

  406. /*----------------  SRAM Address lines configuration -------------------------*/

  407. /*----------------  NOE and NWE configuration --------------------------------*/  

  408. /*----------------  NE3 configuration ----------------------------------------*/

  409. /*----------------  NBL0, NBL1 configuration ---------------------------------*/

  410.   

  411.   GPIOD->CRL = 0x44BB44BB;  

  412.   GPIOD->CRH = 0xBBBBBBBB;

  413. 

  414.   GPIOE->CRL = 0xB44444BB;  

  415.   GPIOE->CRH = 0xBBBBBBBB;

  416. 

  417.   GPIOF->CRL = 0x44BBBBBB;  

  418.   GPIOF->CRH = 0xBBBB4444;

  419. 

  420.   GPIOG->CRL = 0x44BBBBBB;  

  421.   GPIOG->CRH = 0x44444B44;

  422.    

  423. /*----------------  FSMC Configuration ---------------------------------------*/  

  424. /*----------------  Enable FSMC Bank1_SRAM Bank ------------------------------*/

  425.   

  426.   FSMC_Bank1->BTCR[4] = 0x00001011;

  427.   FSMC_Bank1->BTCR[5] = 0x00000200;

  428. }

  429. #endif /* DATA_IN_ExtSRAM */

  430. 

  431. #ifdef SYSCLK_FREQ_HSE

  432. /**

  433.   * @brief  Selects HSE as System clock source and configure HCLK, PCLK2

  434.   *          and PCLK1 prescalers.

  435.   * @note   This function should be used only after reset.

  436.   * @param  None

  437.   * @retval None

  438.   */

  439. static void SetSysClockToHSE(void)

  440. {

  441.   __IO uint32_t StartUpCounter = 0, HSEStatus = 0;

  442.   

  443.   /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/    

  444.   /* Enable HSE */    

  445.   RCC->CR |= ((uint32_t)RCC_CR_HSEON);

  446.  

  447.   /* Wait till HSE is ready and if Time out is reached exit */

  448.   do

  449.   {

  450.     HSEStatus = RCC->CR & RCC_CR_HSERDY;

  451.     StartUpCounter++;  

  452.   } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));

  453. 

  454.   if ((RCC->CR & RCC_CR_HSERDY) != RESET)

  455.   {

  456.     HSEStatus = (uint32_t)0x01;

  457.   }

  458.   else

  459.   {

  460.     HSEStatus = (uint32_t)0x00;

  461.   }  

  462. 

  463.   if (HSEStatus == (uint32_t)0x01)

  464.   {

  465. 

  466. #if !defined STM32F10X_LD_VL && !defined STM32F10X_MD_VL && !defined STM32F10X_HD_VL

  467.     /* Enable Prefetch Buffer */

  468.     FLASH->ACR |= FLASH_ACR_PRFTBE;

  469. 

  470.     /* Flash 0 wait state */

  471.     FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);

  472. 

  473. #ifndef STM32F10X_CL

  474.     FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0;

  475. #else

  476.     if (HSE_VALUE <= 24000000)

  477. 	{

  478.       FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0;

  479. 	}

  480. 	else

  481. 	{

  482.       FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1;

  483. 	}

  484. #endif /* STM32F10X_CL */

  485. #endif

  486.  

  487.     /* HCLK = SYSCLK */

  488.     RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;

  489.       

  490.     /* PCLK2 = HCLK */

  491.     RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;

  492.     

  493.     /* PCLK1 = HCLK */

  494.     RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1;

  495.     

  496.     /* Select HSE as system clock source */

  497.     RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));

  498.     RCC->CFGR |= (uint32_t)RCC_CFGR_SW_HSE;    

  499. 

  500.     /* Wait till HSE is used as system clock source */

  501.     while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x04)

  502.     {

  503.     }

  504.   }

  505.   else

  506.   { /* If HSE fails to start-up, the application will have wrong clock 

  507.          configuration. User can add here some code to deal with this error */

  508.   }  

  509. }

  510. #elif defined SYSCLK_FREQ_24MHz

  511. /**

  512.   * @brief  Sets System clock frequency to 24MHz and configure HCLK, PCLK2 

  513.   *          and PCLK1 prescalers.

  514.   * @note   This function should be used only after reset.

  515.   * @param  None

  516.   * @retval None

  517.   */

  518. static void SetSysClockTo24(void)

  519. {

  520.   __IO uint32_t StartUpCounter = 0, HSEStatus = 0;

  521.   

  522.   /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/    

  523.   /* Enable HSE */    

  524.   RCC->CR |= ((uint32_t)RCC_CR_HSEON);

  525.  

  526.   /* Wait till HSE is ready and if Time out is reached exit */

  527.   do

  528.   {

  529.     HSEStatus = RCC->CR & RCC_CR_HSERDY;

  530.     StartUpCounter++;  

  531.   } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));

  532. 

  533.   if ((RCC->CR & RCC_CR_HSERDY) != RESET)

  534.   {

  535.     HSEStatus = (uint32_t)0x01;

  536.   }

  537.   else

  538.   {

  539.     HSEStatus = (uint32_t)0x00;

  540.   }  

  541. 

  542.   if (HSEStatus == (uint32_t)0x01)

  543.   {

  544. #if !defined STM32F10X_LD_VL && !defined STM32F10X_MD_VL && !defined STM32F10X_HD_VL 

  545.     /* Enable Prefetch Buffer */

  546.     FLASH->ACR |= FLASH_ACR_PRFTBE;

  547. 

  548.     /* Flash 0 wait state */

  549.     FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);

  550.     FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0;    

  551. #endif

  552.  

  553.     /* HCLK = SYSCLK */

  554.     RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;

  555.       

  556.     /* PCLK2 = HCLK */

  557.     RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;

  558.     

  559.     /* PCLK1 = HCLK */

  560.     RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1;

  561.     

  562. #ifdef STM32F10X_CL

  563.     /* Configure PLLs ------------------------------------------------------*/

  564.     /* PLL configuration: PLLCLK = PREDIV1 * 6 = 24 MHz */ 

  565.     RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL);

  566.     RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | 

  567.                             RCC_CFGR_PLLMULL6); 

  568. 

  569.     /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */

  570.     /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 10 = 4 MHz */       

  571.     RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL |

  572.                               RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC);

  573.     RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 |

  574.                              RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV10);

  575.   

  576.     /* Enable PLL2 */

  577.     RCC->CR |= RCC_CR_PLL2ON;

  578.     /* Wait till PLL2 is ready */

  579.     while((RCC->CR & RCC_CR_PLL2RDY) == 0)

  580.     {

  581.     }   

  582. #elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)

  583.     /*  PLL configuration:  = (HSE / 2) * 6 = 24 MHz */

  584.     RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL));

  585.     RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_PREDIV1 | RCC_CFGR_PLLXTPRE_PREDIV1_Div2 | RCC_CFGR_PLLMULL6);

  586. #else    

  587.     /*  PLL configuration:  = (HSE / 2) * 6 = 24 MHz */

  588.     RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL));

  589.     RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLXTPRE_HSE_Div2 | RCC_CFGR_PLLMULL6);

  590. #endif /* STM32F10X_CL */

  591. 

  592.     /* Enable PLL */

  593.     RCC->CR |= RCC_CR_PLLON;

  594. 

  595.     /* Wait till PLL is ready */

  596.     while((RCC->CR & RCC_CR_PLLRDY) == 0)

  597.     {

  598.     }

  599. 

  600.     /* Select PLL as system clock source */

  601.     RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));

  602.     RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;    

  603. 

  604.     /* Wait till PLL is used as system clock source */

  605.     while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08)

  606.     {

  607.     }

  608.   }

  609.   else

  610.   { /* If HSE fails to start-up, the application will have wrong clock 

  611.          configuration. User can add here some code to deal with this error */

  612.   } 

  613. }

  614. #elif defined SYSCLK_FREQ_36MHz

  615. /**

  616.   * @brief  Sets System clock frequency to 36MHz and configure HCLK, PCLK2 

  617.   *          and PCLK1 prescalers. 

  618.   * @note   This function should be used only after reset.

  619.   * @param  None

  620.   * @retval None

  621.   */

  622. static void SetSysClockTo36(void)

  623. {

  624.   __IO uint32_t StartUpCounter = 0, HSEStatus = 0;

  625.   

  626.   /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/    

  627.   /* Enable HSE */    

  628.   RCC->CR |= ((uint32_t)RCC_CR_HSEON);

  629.  

  630.   /* Wait till HSE is ready and if Time out is reached exit */

  631.   do

  632.   {

  633.     HSEStatus = RCC->CR & RCC_CR_HSERDY;

  634.     StartUpCounter++;  

  635.   } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));

  636. 

  637.   if ((RCC->CR & RCC_CR_HSERDY) != RESET)

  638.   {

  639.     HSEStatus = (uint32_t)0x01;

  640.   }

  641.   else

  642.   {

  643.     HSEStatus = (uint32_t)0x00;

  644.   }  

  645. 

  646.   if (HSEStatus == (uint32_t)0x01)

  647.   {

  648.     /* Enable Prefetch Buffer */

  649.     FLASH->ACR |= FLASH_ACR_PRFTBE;

  650. 

  651.     /* Flash 1 wait state */

  652.     FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);

  653.     FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1;    

  654.  

  655.     /* HCLK = SYSCLK */

  656.     RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;

  657.       

  658.     /* PCLK2 = HCLK */

  659.     RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;

  660.     

  661.     /* PCLK1 = HCLK */

  662.     RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1;

  663.     

  664. #ifdef STM32F10X_CL

  665.     /* Configure PLLs ------------------------------------------------------*/

  666.     

  667.     /* PLL configuration: PLLCLK = PREDIV1 * 9 = 36 MHz */ 

  668.     RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL);

  669.     RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | 

  670.                             RCC_CFGR_PLLMULL9); 

  671. 

  672. 	/*!< PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */

  673.     /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 10 = 4 MHz */

  674.         

  675.     RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL |

  676.                               RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC);

  677.     RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 |

  678.                              RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV10);

  679.   

  680.     /* Enable PLL2 */

  681.     RCC->CR |= RCC_CR_PLL2ON;

  682.     /* Wait till PLL2 is ready */

  683.     while((RCC->CR & RCC_CR_PLL2RDY) == 0)

  684.     {

  685.     }

  686.     

  687. #else    

  688.     /*  PLL configuration: PLLCLK = (HSE / 2) * 9 = 36 MHz */

  689.     RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL));

  690.     RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLXTPRE_HSE_Div2 | RCC_CFGR_PLLMULL9);

  691. #endif /* STM32F10X_CL */

  692. 

  693.     /* Enable PLL */

  694.     RCC->CR |= RCC_CR_PLLON;

  695. 

  696.     /* Wait till PLL is ready */

  697.     while((RCC->CR & RCC_CR_PLLRDY) == 0)

  698.     {

  699.     }

  700. 

  701.     /* Select PLL as system clock source */

  702.     RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));

  703.     RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;    

  704. 

  705.     /* Wait till PLL is used as system clock source */

  706.     while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08)

  707.     {

  708.     }

  709.   }

  710.   else

  711.   { /* If HSE fails to start-up, the application will have wrong clock 

  712.          configuration. User can add here some code to deal with this error */

  713.   } 

  714. }

  715. #elif defined SYSCLK_FREQ_48MHz

  716. /**

  717.   * @brief  Sets System clock frequency to 48MHz and configure HCLK, PCLK2 

  718.   *          and PCLK1 prescalers. 

  719.   * @note   This function should be used only after reset.

  720.   * @param  None

  721.   * @retval None

  722.   */

  723. static void SetSysClockTo48(void)

  724. {

  725.   __IO uint32_t StartUpCounter = 0, HSEStatus = 0;

  726.   

  727.   /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/    

  728.   /* Enable HSE */    

  729.   RCC->CR |= ((uint32_t)RCC_CR_HSEON);

  730.  

  731.   /* Wait till HSE is ready and if Time out is reached exit */

  732.   do

  733.   {

  734.     HSEStatus = RCC->CR & RCC_CR_HSERDY;

  735.     StartUpCounter++;  

  736.   } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));

  737. 

  738.   if ((RCC->CR & RCC_CR_HSERDY) != RESET)

  739.   {

  740.     HSEStatus = (uint32_t)0x01;

  741.   }

  742.   else

  743.   {

  744.     HSEStatus = (uint32_t)0x00;

  745.   }  

  746. 

  747.   if (HSEStatus == (uint32_t)0x01)

  748.   {

  749.     /* Enable Prefetch Buffer */

  750.     FLASH->ACR |= FLASH_ACR_PRFTBE;

  751. 

  752.     /* Flash 1 wait state */

  753.     FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);

  754.     FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1;    

  755.  

  756.     /* HCLK = SYSCLK */

  757.     RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;

  758.       

  759.     /* PCLK2 = HCLK */

  760.     RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;

  761.     

  762.     /* PCLK1 = HCLK */

  763.     RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2;

  764.     

  765. #ifdef STM32F10X_CL

  766.     /* Configure PLLs ------------------------------------------------------*/

  767.     /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */

  768.     /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 5 = 8 MHz */

  769.         

  770.     RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL |

  771.                               RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC);

  772.     RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 |

  773.                              RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV5);

  774.   

  775.     /* Enable PLL2 */

  776.     RCC->CR |= RCC_CR_PLL2ON;

  777.     /* Wait till PLL2 is ready */

  778.     while((RCC->CR & RCC_CR_PLL2RDY) == 0)

  779.     {

  780.     }

  781.     

  782.    

  783.     /* PLL configuration: PLLCLK = PREDIV1 * 6 = 48 MHz */ 

  784.     RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL);

  785.     RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | 

  786.                             RCC_CFGR_PLLMULL6); 

  787. #else    

  788.     /*  PLL configuration: PLLCLK = HSE * 6 = 48 MHz */

  789.     RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL));

  790.     RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL6);

  791. #endif /* STM32F10X_CL */

  792. 

  793.     /* Enable PLL */

  794.     RCC->CR |= RCC_CR_PLLON;

  795. 

  796.     /* Wait till PLL is ready */

  797.     while((RCC->CR & RCC_CR_PLLRDY) == 0)

  798.     {

  799.     }

  800. 

  801.     /* Select PLL as system clock source */

  802.     RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));

  803.     RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;    

  804. 

  805.     /* Wait till PLL is used as system clock source */

  806.     while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08)

  807.     {

  808.     }

  809.   }

  810.   else

  811.   { /* If HSE fails to start-up, the application will have wrong clock 

  812.          configuration. User can add here some code to deal with this error */

  813.   } 

  814. }

  815. 

  816. #elif defined SYSCLK_FREQ_56MHz

  817. /**

  818.   * @brief  Sets System clock frequency to 56MHz and configure HCLK, PCLK2 

  819.   *          and PCLK1 prescalers. 

  820.   * @note   This function should be used only after reset.

  821.   * @param  None

  822.   * @retval None

  823.   */

  824. static void SetSysClockTo56(void)

  825. {

  826.   __IO uint32_t StartUpCounter = 0, HSEStatus = 0;

  827.   

  828.   /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/   

  829.   /* Enable HSE */    

  830.   RCC->CR |= ((uint32_t)RCC_CR_HSEON);

  831.  

  832.   /* Wait till HSE is ready and if Time out is reached exit */

  833.   do

  834.   {

  835.     HSEStatus = RCC->CR & RCC_CR_HSERDY;

  836.     StartUpCounter++;  

  837.   } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));

  838. 

  839.   if ((RCC->CR & RCC_CR_HSERDY) != RESET)

  840.   {

  841.     HSEStatus = (uint32_t)0x01;

  842.   }

  843.   else

  844.   {

  845.     HSEStatus = (uint32_t)0x00;

  846.   }  

  847. 

  848.   if (HSEStatus == (uint32_t)0x01)

  849.   {

  850.     /* Enable Prefetch Buffer */

  851.     FLASH->ACR |= FLASH_ACR_PRFTBE;

  852. 

  853.     /* Flash 2 wait state */

  854.     FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);

  855.     FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_2;    

  856.  

  857.     /* HCLK = SYSCLK */

  858.     RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;

  859.       

  860.     /* PCLK2 = HCLK */

  861.     RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;

  862.     

  863.     /* PCLK1 = HCLK */

  864.     RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2;

  865. 

  866. #ifdef STM32F10X_CL

  867.     /* Configure PLLs ------------------------------------------------------*/

  868.     /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */

  869.     /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 5 = 8 MHz */

  870.         

  871.     RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL |

  872.                               RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC);

  873.     RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 |

  874.                              RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV5);

  875.   

  876.     /* Enable PLL2 */

  877.     RCC->CR |= RCC_CR_PLL2ON;

  878.     /* Wait till PLL2 is ready */

  879.     while((RCC->CR & RCC_CR_PLL2RDY) == 0)

  880.     {

  881.     }

  882.     

  883.    

  884.     /* PLL configuration: PLLCLK = PREDIV1 * 7 = 56 MHz */ 

  885.     RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL);

  886.     RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | 

  887.                             RCC_CFGR_PLLMULL7); 

  888. #else     

  889.     /* PLL configuration: PLLCLK = HSE * 7 = 56 MHz */

  890.     RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL));

  891.     RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL7);

  892. 

  893. #endif /* STM32F10X_CL */

  894. 

  895.     /* Enable PLL */

  896.     RCC->CR |= RCC_CR_PLLON;

  897. 

  898.     /* Wait till PLL is ready */

  899.     while((RCC->CR & RCC_CR_PLLRDY) == 0)

  900.     {

  901.     }

  902. 

  903.     /* Select PLL as system clock source */

  904.     RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));

  905.     RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;    

  906. 

  907.     /* Wait till PLL is used as system clock source */

  908.     while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08)

  909.     {

  910.     }

  911.   }

  912.   else

  913.   { /* If HSE fails to start-up, the application will have wrong clock 

  914.          configuration. User can add here some code to deal with this error */

  915.   } 

  916. }

  917. 

  918. #elif defined SYSCLK_FREQ_72MHz

  919. /**

  920.   * @brief  Sets System clock frequency to 72MHz and configure HCLK, PCLK2 

  921.   *          and PCLK1 prescalers. 

  922.   * @note   This function should be used only after reset.

  923.   * @param  None

  924.   * @retval None

  925.   */

  926. static void SetSysClockTo72(void)

  927. {

  928.   __IO uint32_t StartUpCounter = 0, HSEStatus = 0;

  929.   

  930.   /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/    

  931.   /* Enable HSE */    

  932.   RCC->CR |= ((uint32_t)RCC_CR_HSEON);

  933.  

  934.   /* Wait till HSE is ready and if Time out is reached exit */

  935.   do

  936.   {

  937.     HSEStatus = RCC->CR & RCC_CR_HSERDY;

  938.     StartUpCounter++;  

  939.   } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));

  940. 

  941.   if ((RCC->CR & RCC_CR_HSERDY) != RESET)

  942.   {

  943.     HSEStatus = (uint32_t)0x01;

  944.   }

  945.   else

  946.   {

  947.     HSEStatus = (uint32_t)0x00;

  948.   }  

  949. 

  950.   if (HSEStatus == (uint32_t)0x01)

  951.   {

  952.     /* Enable Prefetch Buffer */

  953.     FLASH->ACR |= FLASH_ACR_PRFTBE;

  954. 

  955.     /* Flash 2 wait state */

  956.     FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);

  957.     FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_2;    

  958. 

  959.  

  960.     /* HCLK = SYSCLK */

  961.     RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;

  962.       

  963.     /* PCLK2 = HCLK */

  964.     RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;

  965.     

  966.     /* PCLK1 = HCLK */

  967.     RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2;

  968. 

  969. #ifdef STM32F10X_CL

  970.     /* Configure PLLs ------------------------------------------------------*/

  971.     /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */

  972.     /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 5 = 8 MHz */

  973.         

  974.     RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL |

  975.                               RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC);

  976.     RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 |

  977.                              RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV5);

  978.   

  979.     /* Enable PLL2 */

  980.     RCC->CR |= RCC_CR_PLL2ON;

  981.     /* Wait till PLL2 is ready */

  982.     while((RCC->CR & RCC_CR_PLL2RDY) == 0)

  983.     {

  984.     }

  985.     

  986.    

  987.     /* PLL configuration: PLLCLK = PREDIV1 * 9 = 72 MHz */ 

  988.     RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL);

  989.     RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | 

  990.                             RCC_CFGR_PLLMULL9); 

  991. #else    

  992.     /*  PLL configuration: PLLCLK = HSE * 9 = 72 MHz */

  993.     RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE |

  994.                                         RCC_CFGR_PLLMULL));

  995.     RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL9);

  996. #endif /* STM32F10X_CL */

  997. 

  998.     /* Enable PLL */

  999.     RCC->CR |= RCC_CR_PLLON;

  1000. 

  1001.     /* Wait till PLL is ready */

  1002.     while((RCC->CR & RCC_CR_PLLRDY) == 0)

  1003.     {

  1004.     }

  1005.     

  1006.     /* Select PLL as system clock source */

  1007.     RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));

  1008.     RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;    

  1009. 

  1010.     /* Wait till PLL is used as system clock source */

  1011.     while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08)

  1012.     {

  1013.     }

  1014.   }

  1015.   else

  1016.   { /* If HSE fails to start-up, the application will have wrong clock 

  1017.          configuration. User can add here some code to deal with this error */

  1018.   }

  1019. }

  1020. #endif

  1021. 

  1022. /**

  1023.   * @}

  1024.   */

  1025. 

  1026. /**

  1027.   * @}

  1028.   */

  1029.   

  1030. /**

  1031.   * @}

  1032.   */    

  1033. /******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/