zhanqingxia
/
card_2.4G_compare_tools
Bevaka 1
Stjärnmärk 0
Förgrening 0
Kod Ärenden 0 Pull-förfrågningar 0 Släpp 0 Wiki Aktiviteter
Du kan inte välja fler än 25 ämnen Ämnen måste starta med en bokstav eller siffra, kan innehålla bindestreck ('-') och vara max 35 tecken långa.
1 Commit
1 Gren
2.6MB
Träd: cec8ffabff
Grenar Taggar
${ item.name }
Skapa branchen ${ searchTerm }
från 'cec8ffabff'
${ noResults }
card_2.4G_compare_tools/bsp/main.c

598 lines
14KB
Rå Blame Historik 

  1. /**

  2.   ******************************************************************************

  3.   **说明：003项目写码程序

  4.   **功能：答题卡写码

  5.   **作者：Bruce

  6.   **日期：2017.6.8

  7.   ******************************************************************************

  8. **/ 

  9. 

  10. /* Includes ------------------------------------------------------------------*/

  11. #include "stm32f10x.h"

  12. #include "printf.h"

  13. #include "USART2.h"

  14. #include "LED.h"

  15. #include "delay.h"

  16. #include "nrf24L01.h"

  17. #include "DataProc.h"

  18. #include "tim.h"

  19. #include "flash.h"

  20. #include "LCD.h"

  21. 

  22. 

  23. 

  24. /* Functions ---------------------------------------------------------*/

  25. void RCC_Configuration(void);

  26. void NVIC_Configuration(void);

  27. 

  28. void IWDG_Init(u8 prer,u16 rlr);

  29. void IWDG_Feed(void);

  30. 

  31. extern unsigned char txBuf[32];

  32. extern u8 protocol_config_flg;

  33. extern u8 first_clear_flag;

  34. 

  35. #if defined (STM32F10X_LD_VL) || (defined STM32F10X_MD_VL) || (defined STM32F10X_HD_VL)

  36. 

  37. #define SYSCLK_FREQ_24MHz  24000000

  38. #else

  39. #define SYSCLK_FREQ_72MHz  72000000

  40. #endif

  41. 

  42. /** @addtogroup STM32F10x_StdPeriph_Template

  43.   * @{

  44.   */

  45. 

  46. /* Private typedef -----------------------------------------------------------*/

  47. /* Private define ------------------------------------------------------------*/

  48. /**

  49.   * @brief  Main program.

  50.   * @param  None

  51.   * @retval None

  52.   */

  53. #if 1

  54. #define SCAN_ADDRESS         (unsigned char*)"\x34\x43\x10\x10\x01"

  55. #define SCAN_SETUPVALUE      0x07

  56. #define SCAN_TX_ADR_WIDTH    (5)       //3???????

  57. #define SCAN_RX_ADR_WIDTH    (5)       //3???????

  58. #define SCAN_RX_PLOAD_WIDTH  (10)    //32?????????

  59. #define SCAN_TX_PLOAD_WIDTH  (10)      //32?????????

  60. #define SCAN_RF_CRC          (0x00)

  61. #define SCAN_RF_ENAA         (0x01)

  62. #define  SCAN_TX_CHNL       (40)      //??????1

  63. #define  SCAN_RX_CHNL       (40)      //??????2

  64. #define  SCAN_DYNPD         (0x01)

  65. #define  SCAN_FEATURE       (0x07)

  66. 

  67. void NRF24L01_TELPO_RX_Mode(SPIType spiNum,unsigned char* addr,

  68.                              unsigned char addrlen,

  69.                              unsigned char rf_channel,

  70.                              unsigned char rf_setup,

  71.                              unsigned char rf_crc,

  72.                              unsigned char rf_enaa,  

  73.                              unsigned char len,

  74.                              unsigned char dynpd,

  75.                              unsigned char feature)

  76. {

  77.     NRF24L01_Write_Reg(spiNum,NRF_WRITE_REG+SETUP_AW,addrlen - 2);//???? --3??

  78.     NRF24L01_Write_Buf(spiNum,NRF_WRITE_REG+RX_ADDR_P0,(u8*)addr,addrlen);//?RX???? 

  79.     NRF24L01_Write_Buf(spiNum,NRF_WRITE_REG+TX_ADDR,(u8*)addr,addrlen);//?TX???? 

  80. 

  81.    

  82.     NRF24L01_Write_Reg(spiNum,NRF_WRITE_REG+EN_AA,rf_enaa);    //????0?????    

  83. 

  84.     NRF24L01_Write_Reg(spiNum,NRF_WRITE_REG+EN_RXADDR,0x01);//????0?????    

  85. 

  86.     NRF24L01_Write_Reg(spiNum,NRF_WRITE_REG+RF_CH,rf_channel);        //??RF????

  87.                                                    

  88.     NRF24L01_Write_Reg(spiNum,NRF_WRITE_REG+RF_SETUP,rf_setup);//??TX????,0db??,1Mbps,???????     

  89.     

  90.     NRF24L01_Write_Reg(spiNum,NRF_WRITE_REG+RX_PW_P0,len);//????0??????? 

  91.     

  92. 

  93.     NRF24L01_Write_Reg(spiNum,NRF_WRITE_REG+CONFIG, (0x3b | rf_crc));//???????????;PWR_UP,EN_CRC,16BIT_CRC,???? 

  94.     NRF24L01_Write_Reg(spiNum,NRF_WRITE_REG+DYNPD,dynpd);

  95. 

  96.     NRF24L01_Write_Reg(spiNum,NRF_WRITE_REG+FEATURF,feature);  

  97.     NRF24L01_Write_Reg(spiNum,NRF_WRITE_REG+STATUS,0x70);       //??TX_DS?MAX_RT????

  98.     NRF24L01_Write_Reg(spiNum,FLUSH_RX,0xff);   //??RX FIFO???  

  99. }  

  100. 

  101. 

  102. void NRF24L01_RX_TelPo_CONFIG1(SPIType spiNum)

  103. {

  104. 	if(spiNum == SPI_PORT1){

  105. 		SPI1_CE =0;

  106. 	}else{

  107. 		SPI2_CE=0;	

  108. 	}	

  109.         NRF24L01_TELPO_RX_Mode(spiNum,SCAN_ADDRESS,SCAN_RX_ADR_WIDTH,SCAN_RX_CHNL,

  110.                          SCAN_SETUPVALUE,SCAN_RF_CRC,SCAN_RF_ENAA,

  111.                          SCAN_RX_PLOAD_WIDTH,SCAN_DYNPD,SCAN_FEATURE); 

  112.    	if(spiNum == SPI_PORT1){     //CE为高,进入接收模式

  113. 		SPI1_CE =1;

  114. 	}else{

  115. 		SPI2_CE=1;	

  116. 	}     

  117. }	 

  118. #endif

  119. u8 NRF24L01_RxPacket1(SPIType spiNum,u8 *rxbuf,unsigned char rxLen)

  120. {

  121.   u8 sta;                  

  122.     SPI_SetSpeed(spiNum,SPI_BaudRatePrescaler_16);

  123.   //SPI_SetSpeed(spiNum,SPI_BaudRatePrescaler_8); //spi???9Mhz(24L01???SPI???10Mhz)   

  124.   sta=NRF24L01_Read_Reg(spiNum,STATUS);  //?????????       

  125.   

  126.   if(sta&RX_OK)//?????

  127.   {

  128.       

  129. 

  130.     NRF24L01_Read_Buf(spiNum,RD_RX_PLOAD,rxbuf,rxLen);  //????

  131.     NRF24L01_Write_Reg(spiNum,FLUSH_RX,0xff);  //??RX FIFO??? 

  132.       NRF24L01_Write_Reg(spiNum,NRF_WRITE_REG+STATUS,sta); //??TX_DS?MAX_RT????  

  133.     delay_5us(20);

  134.     return 0; 

  135.   }     

  136.   return 1;//???????

  137. }   

  138. 

  139. 

  140. int main(void)

  141. {

  142.   /*!< At this stage the microcontroller clock setting is already configured, 

  143.        this is done through SystemInit() function which is called from startup

  144.        file (startup_stm32f10x_xx.s) before to branch to application main.

  145.        To reconfigure the default setting of SystemInit() function, refer to

  146.        system_stm32f10x.c file

  147.      */     

  148.     //SCB->VTOR = FLASH_BASE | 0x10000; /* Vector Table Relocation in Internal FLASH. */

  149. 

  150.     RCC_Configuration();    //系统时钟设置

  151.     

  152.     NVIC_Configuration();   //中断向量配置

  153.     

  154.     IWDG_Init(4,625);   //(4*2^4)*625/40 ms = 1s 看门狗定时1s

  155.     IWDG_Feed();

  156.     

  157.     TIM3_Int_Init(9,7199);

  158.     

  159.     led_init();             //LED IO配置

  160. #if LCD

  161.     lcd_init();             //LCD 配置

  162.     AttenuatorConfig();     //衰减器配置

  163. #endif

  164.     

  165. 	USART_Configuration();  //串口1、3初始化配置  串口1波特率为115200 串口3波特率为4800

  166.     

  167.     USART2_Init(115200);    //串口2初始化 波特率为115200 Debug

  168.     

  169.     NRF24L01_Init();        //24L01 IO配置

  170.     

  171.     IWDG_Feed();

  172. //    while(NRF24L01_Check(SPI_REV)){	    //检测NRF24L01 1是否存在

  173. //		printf("The 2.4G Error!");

  174. //	}

  175. #if 1    

  176.     while(NRF24L01_Check(SPI_SEND)){	    //检测NRF24L01 2是否存在

  177. 		printf("The 2.4G Error!");

  178. 	}

  179. #endif    

  180.     Data_Init();   //包数据初始化

  181.     

  182.     IWDG_Feed();

  183.     led0=~led0;

  184.     delay_ms(200);

  185.     led0=~led0;

  186.     

  187.     DegugPrintf("123456",6);

  188.     SendUSART2Str("\n");

  189.                         

  190.     IWDG_Feed();

  191. #if 0	

  192. while(1)

  193. {	  

  194. 	  NRF24L01_RX_TelPo_CONFIG1(SPI_SEND);

  195. 	  while(1)

  196. 	  {	 

  197.         u8 Rx_Buffer[32] = {0};

  198. 		

  199.         if (!NRF24L01_RxPacket1(SPI_SEND,Rx_Buffer,sizeof(Rx_Buffer)))

  200.         {

  201.             break;

  202.         }

  203. 		

  204. 		IWDG_Feed();        

  205. 	  }

  206. 	  IWDG_Feed(); 

  207. }

  208. #endif

  209. 	printf("\nPC对码软件通用版本V2.4-20190906\n");

  210. //    SendUartData("123456",6,USART2);

  211. //    printf("System Clock = %d\r\n",SystemCoreClock);

  212. 

  213.     NRF24L01_RX_Mode(SPI_SEND);

  214. //    NRF24L01_RX_Mode_NOACK(SPI_SEND);

  215. //while(1)

  216. //{

  217. //	 RF24_CarrierTest(SPI_SEND,32);

  218. //	delay_ms(100);

  219. //	 IWDG_Feed();

  220. //}

  221. 

  222.  #if 1

  223.     Readpara_from_flash();  //读出数据并打印出来

  224.     protocol_config_flg = Save_Buffer[2*0];

  225. 	switch(protocol_config_flg)

  226. 	{

  227. 		case 0:

  228. 		{			

  229. 			printf("江西协议\r\n");

  230. #if LCD

  231. 			vDispClearLine(1);

  232. 			vDispStr(1,1,"JIANGXI",7);

  233. #endif

  234. 			break;

  235. 		}

  236. 		case 1:

  237. 		{

  238. 			printf("天波协议\r\n");

  239. #if LCD

  240. 			vDispClearLine(1);

  241. 			vDispStr(1,1,"TELPO",5);

  242. #endif

  243. 			break;

  244. 		}

  245. 		case 2:

  246. 		{

  247. 			printf("云南协议\r\n");

  248. #if LCD

  249. 			vDispClearLine(1);

  250. 			vDispStr(1,1,"YUNNAN",6);

  251. #endif

  252. 			break;

  253. 		}

  254. 		case 3:

  255. 		{

  256. 			printf("贵州协议\r\n");

  257. #if LCD

  258. 			vDispClearLine(1);

  259. 			vDispStr(1,1,"GUIZHOU",7);

  260. #endif

  261. 			break;

  262. 		}

  263. 		case 4:

  264. 		{

  265. 			printf("四川协议\r\n");

  266. #if LCD

  267. 			vDispClearLine(1);

  268. 			vDispStr(1,1,"SICHUAN",7);

  269. #endif

  270. 			break;

  271. 		}

  272. 		case 5:

  273. 		{

  274. 			printf("内蒙古协议\r\n"); 

  275. #if LCD

  276. 			vDispClearLine(1);

  277. 			vDispStr(1,1,"NEIMENGGU",9);

  278. #endif

  279. 			break;

  280. 		}

  281. 		case 6:

  282. 		{

  283. 			printf("安徽协议\r\n"); 

  284. #if LCD

  285. 			vDispClearLine(1);

  286. 			vDispStr(1,1,"ANHUI",5);

  287. #endif

  288. 			break;

  289. 		}

  290. 		case 7:

  291. 		{

  292. 			printf("山西鑫诺协议\r\n"); 

  293. #if LCD

  294. 			vDispClearLine(1);

  295. 			vDispStr(1,1,"SHANXI",6);

  296. #endif

  297. 			break;

  298. 		}

  299. 		case 8:

  300. 		{

  301. 			printf("VCOM测试\r\n");

  302. #if LCD

  303. 			vDispClearLine(1);

  304. 			vDispStr(1,1,"VCOM",4);

  305. #endif

  306. 			break;

  307. 		}

  308. 		case 9:

  309. 		{

  310. 			printf("辽宁电信\r\n");

  311. #if LCD

  312. 			vDispClearLine(1);

  313. 			vDispStr(1,1,"LIAONING.DIAN",13);

  314. #endif

  315. 			break;

  316. 		}

  317. 		case 10:

  318. 		{

  319. 			printf("辽宁移动\r\n");

  320. #if LCD

  321. 			vDispClearLine(1);

  322. 			vDispStr(1,1,"LIAONING.YI",11);

  323. #endif

  324. 			break;

  325. 		}

  326. 		case 11:

  327. 		{

  328. 			printf("Tp专用协议\r\n");

  329. #if LCD

  330. 			vDispClearLine(1);

  331. 			vDispStr(1,1,"TP",2);

  332. #endif

  333. 			break;

  334. 		}

  335. 		case 12:

  336. 		{

  337. 			printf("内蒙古移动协议\r\n");

  338. #if LCD

  339. 			vDispClearLine(1);

  340. 			vDispStr(1,1,"NEIMENGGU.YI",12);

  341. #endif

  342. 			break;

  343. 		}

  344. 		case 13:

  345. 		{

  346. 			printf("广西移动协议\r\n");

  347. #if LCD

  348. 			vDispClearLine(1);

  349. 			vDispStr(1,1,"GUANGXI.YI",10);

  350. #endif

  351. 			break;

  352. 		}

  353. 		case 14:

  354. 		{

  355. 			printf("四川电信协议\r\n");

  356. #if LCD

  357. 			vDispClearLine(1);

  358. 			vDispStr(1,1,"SICHUN.DIAN",11);

  359. #endif

  360. 			break;

  361. 		}

  362. 		case 15:

  363. 		{

  364. 			printf("福建真灼协议\r\n");

  365. #if LCD

  366. 			vDispClearLine(1);

  367. 			vDispStr(1,1,"FUJIANZHENZHUO",14);

  368. #endif

  369. 			break;

  370. 		}

  371. 		case 16:

  372. 		{

  373. 			printf("苏州木兰协议\r\n");

  374. #if LCD

  375. 			vDispClearLine(1);

  376. 			vDispStr(1,1,"SUZHOUMULANG",10);

  377. #endif

  378. 			break;

  379. 		}

  380. 		case 17:

  381. 		{

  382. 			printf("重庆移动协议\r\n");

  383. #if LCD

  384. 			vDispClearLine(1);

  385. 			vDispStr(1,1,"CHONGQIN.YI",11);

  386. #endif

  387. 			break;

  388. 		}

  389. 		case 18:

  390. 		{

  391. 			printf("山西移动协议\r\n");

  392. #if LCD

  393. 			vDispClearLine(1);

  394. 			vDispStr(1,1,"SHANXI.YI",9);

  395. #endif

  396. 			break;

  397. 		}

  398. 		case 19:

  399. 		{

  400. 			printf("甘肃移动协议\r\n");

  401. #if LCD

  402. 			vDispClearLine(1);

  403. 			vDispStr(1,1,"GANSU.YI",9);

  404. #endif

  405. 			break;

  406. 		}

  407. 		case 20:

  408. 		{

  409. 			printf("信达丰协议\r\n");

  410. #if LCD

  411. 			vDispClearLine(1);

  412. 			vDispStr(1,1,"XDF",3);

  413. #endif

  414. 			break;

  415. 		}

  416. 		case 21:

  417. 		{

  418. 			printf("德海协议\r\n");

  419. #if LCD

  420. 			vDispClearLine(1);

  421. 			vDispStr(1,1,"DH",2);

  422. #endif

  423. 			break;

  424. 		}

  425. 		case 22:

  426. 		{

  427. 			printf("安徽电信协议\r\n");

  428. #if LCD

  429. 			vDispClearLine(1);

  430. 			vDispStr(1,1,"AHDX",4);

  431. #endif

  432. 			break;

  433. 		}		

  434. 	}

  435.  #endif

  436. 	

  437. #if 0

  438.   NRF24L01_RX_TelPo_CONFIG1(SPI_SEND);

  439. while(1)

  440. {

  441.    

  442.         u8 Rx_Buffer[32] = {0};

  443.         if (!NRF24L01_RxPacket(SPI_SEND,Rx_Buffer))

  444.         {

  445.             break;

  446.         }

  447.         

  448. }	

  449. 	

  450. #endif

  451. 	

  452. 	

  453. 	

  454. 	

  455.   /* Infinite loop */

  456.     //SendConsoleByte(protocol_config_flg);   //回显，返回给PC端

  457.     //NRF24L01_RX_Mode_NOACK_VCOM(SPI_SEND);

  458.     first_clear_flag = 1;

  459.     delay_ms(50);

  460.     while (1)

  461.     {

  462.         

  463. //		while(1)   //

  464. //        {                      

  465. //            if(DataProc_A4_nrf())

  466. //            break;

  467. //        }

  468.         DataProc_1356();        //13.56M数据处理

  469.  #if LCD       

  470.         DataProc_RecNrf24L01();

  471.  #endif

  472.         

  473.         DataProc_USART1();      //串口1数据处理，与PC端软件通信

  474.         

  475. //        DataProc_Nrf24l01_SPI2();

  476.     }

  477. }

  478. 

  479. 

  480. 

  481. void RCC_Configuration(void)

  482. {

  483. #if 0

  484. 	ErrorStatus HSEStartUpStatus;                   //枚举变量，定义高速时钟的启动状态

  485. 	RCC_DeInit();                                   //RCC系统重置，用于Debug

  486. 	RCC_HSEConfig(RCC_HSE_ON);                      //使能高速时钟源HSE  

  487. 	HSEStartUpStatus = RCC_WaitForHSEStartUp();     //等待HSE稳定

  488. 	if(HSEStartUpStatus == SUCCESS)

  489. 	{	

  490. 		RCC_HCLKConfig(RCC_SYSCLK_Div1);            // HCLK = SYSCLK

  491. 		RCC_PCLK2Config(RCC_HCLK_Div1);             // PCLK2 = HCLK

  492. 		RCC_PCLK1Config(RCC_HCLK_Div2);             // PCLK1 = HCLK/2

  493. 		

  494. 		RCC_PLLConfig(RCC_PLLSource_HSE_Div1, RCC_PLLMul_9);

  495. 		RCC_PLLCmd(ENABLE);

  496. 		while(RCC_GetFlagStatus(RCC_FLAG_PLLRDY) == RESET){}

  497. 		

  498. 		RCC_SYSCLKConfig(RCC_SYSCLKSource_PLLCLK);

  499. 		while(RCC_GetSYSCLKSource() != 0x08){}

  500. 	}

  501. 	RCC_APB2PeriphClockCmd( RCC_APB2Periph_USART1 |RCC_APB2Periph_GPIOA |RCC_APB2Periph_AFIO |RCC_APB2Periph_GPIOB , ENABLE);

  502. 	RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM3, ENABLE);

  503. #else

  504. 	RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA | RCC_APB2Periph_GPIOB |RCC_APB2Periph_AFIO | RCC_APB2Periph_USART1, ENABLE); 

  505. 	RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM3, ENABLE);

  506. 

  507. 	/* Select AHB clock(HCLK) as SysTick clock source */

  508. 	SysTick_CLKSourceConfig(SysTick_CLKSource_HCLK);

  509. 

  510. 	/* SysTick interrupt each 10ms with HCLK equal to 72MHz */

  511. 	SysTick_Config(240000); 

  512. 

  513. #endif

  514. }

  515. 

  516. void NVIC_Configuration(void)

  517. {              

  518. 	NVIC_InitTypeDef NVIC_InitStructure;   

  519.     NVIC_PriorityGroupConfig(NVIC_PriorityGroup_1);

  520. 

  521. 	NVIC_InitStructure.NVIC_IRQChannel = USART2_IRQn;           //设置串口2中断

  522. 	NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 1;   //抢占优先级1

  523. 	NVIC_InitStructure.NVIC_IRQChannelSubPriority = 2;          //子优先级2

  524. 	NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;             //使能中断

  525. 	NVIC_Init(&NVIC_InitStructure);

  526.     

  527.     NVIC_InitStructure.NVIC_IRQChannel = USART3_IRQn;           //设置串口3中断

  528. 	NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 1;   //抢占优先级1

  529. 	NVIC_InitStructure.NVIC_IRQChannelSubPriority = 1;          //子优先级1

  530. 	NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;             //使能中断

  531. 	NVIC_Init(&NVIC_InitStructure);

  532.     

  533.     NVIC_InitStructure.NVIC_IRQChannel = USART1_IRQn;           //设置串口1中断

  534. 	NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0;   //抢占优先级0

  535. 	NVIC_InitStructure.NVIC_IRQChannelSubPriority = 1;          //子优先级1

  536. 	NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;             //使能中断

  537. 	NVIC_Init(&NVIC_InitStructure);

  538.     

  539.     NVIC_InitStructure.NVIC_IRQChannel = TIM3_IRQn;             //设置定时器3全局中断

  540. 	NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0;   //抢占优先级0

  541. 	NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;          //子优先级为0

  542. 	NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;             //使能

  543. 	NVIC_Init(&NVIC_InitStructure);

  544.     

  545. }

  546. 

  547. /*

  548. *看门狗初始化函数

  549. *prer:分频数：0-7，低3位有效

  550. *分频因子：4*2^prer，最大256

  551. *rlr:重装载寄存器值，低11位有效

  552. *Tout=((4*2^prer)*rlr)/40 (ms)

  553. */

  554. void IWDG_Init(u8 prer,u16 rlr)

  555. {

  556.     IWDG_WriteAccessCmd(IWDG_WriteAccess_Enable); // 使能对寄存器IWDG_PR和IWDG_RLR的操作

  557.     IWDG_SetPrescaler(prer);    //设置IWDG预分频值:prer

  558.     IWDG_SetReload(rlr);        //设置IWDG重载值

  559.     IWDG_ReloadCounter();       //按照设置值，重载IWDG计数器

  560.     IWDG_Enable();              //使能IWDG

  561. }

  562. 

  563. /**

  564.  * 喂狗

  565.  */

  566. void IWDG_Feed(void)

  567. {

  568.     IWDG_ReloadCounter();    /*reload*/

  569. }

  570. 

  571. #ifdef  USE_FULL_ASSERT

  572. 

  573. /**

  574.   * @brief  Reports the name of the source file and the source line number

  575.   *   where the assert_param error has occurred.

  576.   * @param  file: pointer to the source file name

  577.   * @param  line: assert_param error line source number

  578.   * @retval None

  579.   */

  580. void assert_failed(uint8_t* file, uint32_t line)

  581. { 

  582.   /* User can add his own implementation to report the file name and line number,

  583.      ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */

  584. 

  585.   /* Infinite loop */

  586.   while (1)

  587.   {

  588.   }

  589. }

  590. #endif

  591. 

  592. /**

  593.   * @}

  594.   */

  595. 

  596. 

  597. /******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/